Call: 866-398-9323 Free Estimate
Licensed Contractor CBC1267322

Seawall Erosion Control Services

Stop Shoreline Loss Before It's Too Late

866-398-9323

Get a Free Inspection

Licensed seawall specialists — FL · GA · SC

Or call directly: 866-398-9323

✓ Licensed & Insured✓ NCFI-Certified✓ Free Inspections✓ FL · GA · SC✓ 30 Years Experience

Quick Answer

Seawall Repairs by Solid Foundations provides professional Seawall Erosion Control for waterfront homeowners and commercial waterfront properties across Florida, Georgia, and South Carolina. Licensed CBC1267322, NCFI-certified, 30+ years experience. Most repairs completed in 1–2 days. Call 866-398-9323 for a free inspection.

What Is Seawall Erosion Control?

Seawall erosion is the leading cause of seawall failure — and it's almost always invisible until the damage is severe. At Seawall Repairs by Solid Foundations, we specialize in diagnosing and stopping erosion behind, beneath, and around your seawall before it reaches catastrophic failure. Our non-invasive erosion control methods preserve your existing structure and cost a fraction of full replacement.

How Does Seawall Erosion Control Work?

Seawall erosion occurs when the soil or fill material behind the seawall panel is displaced by water intrusion. Water enters through panel cracks, joint gaps, or around the toe of the wall, carrying fill material outward with each tidal cycle. Over time, this creates voids — empty spaces behind the panel — that allow the wall to crack, tilt, and eventually collapse. Erosion control means sealing the entry points and refilling the voids before structural failure occurs.

How It Works

1

Free Site Assessment

We inspect the wall visually from both land and water sides, use a probe rod to test for voids, and assess the soil conditions along the base.

2

Void Mapping

We identify the location and extent of voids behind the panel using probe testing and, on larger projects, ground-penetrating radar.

3

Entry Point Sealing

All cracks, joint gaps, and toe openings are sealed with compatible materials — preventing further water intrusion.

4

Polyurethane Void Fill

NCFI-certified polyurethane foam is injected through the panel into all identified voids. The foam expands, fills the void completely, and cures to a rigid, waterproof mass.

5

Relief Drain Installation

Where hydrostatic pressure is contributing to erosion, we install relief drains to equalize pressure and prevent future erosion events.

6

Final Inspection

We re-probe all treated areas to confirm complete void fill and provide a written report of all work performed.

Benefits

  • Stops ongoing erosion and prevents further soil loss
  • Fills existing voids behind the seawall panel
  • No excavation — completed from the water side in most cases
  • NCFI-certified polyurethane materials approved for coastal construction
  • Completed in 1–2 days for most residential seawalls
  • Extends seawall service life by 15–25 years
  • Costs 30–70% less than full seawall replacement

Pricing

Seawall erosion control typically costs $80–$300 per linear foot depending on void depth and extent, fill material needed, and wall accessibility. A typical 80-foot residential seawall erosion repair runs $5,000–$18,000. This compares to $30,000–$80,000 for full seawall replacement.

Common Questions About Seawall Erosion Control

Licensed & Insured — FL CBC1267322
NCFI-Certified Installer
BBB A+ Rated
Free Inspections Included
Most Repairs: 1–2 Days
Lifetime Warranty Available
Request Free Estimate →

Get a Free Inspection

Licensed, insured, NCFI-certified. Serving Florida, Georgia & South Carolina since 1996.

866-398-9323